background image

CONTACTS

  –  DRAPER TOOLS LIMITED, 

 

Hursley Road, Chandler's Ford,  

  

 

Eastleigh, Hampshire. SO53 1YF.  U.K.

  –  Helpline: 

(023) 8049 4344 

  –  Sales Desk: 

(023) 8049 4333

  –  Internet: 

www.drapertools.com

  –  E-mail: 

[email protected]

  –  Sales Fax: 

(023) 8049 4209

  

 General Enquiries: 

(023) 8026 6355

  –  Service/Warranty Repair Agent

 

For aftersales servicing or warranty repairs, please  

 

 

contact the Draper Tools Helpline for details of an   

 

 

agent in your local area.

YOUR DRAPER STOCKIST

KCLJ0218

©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or 
transmitted in any form or by any means, electronic, mechanical photocopying, 
recording or otherwise without prior permission in writing from Draper Tools Ltd.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE 

SAFE AND EFFECTIVE USE OF THIS PRODUCT.

INSTRUCTIONS 

These instructions accompanying the product are the original instructions. This document is part of the product, 
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these 
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been 
designed, and contains all the necessary information to ensure its correct and safe use. By following all the 
general safety instructions contained in this manual, it will ensure both product and operator safety, together 
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the 
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper 
Tools policy of continuous improvement determines the right to make modifications without prior warning.

PETROL

CHAINSAW

02567

Содержание 02567

































Отзывы: