Step 1:
Open the box and remove product and all its parts
from packaging.
Step 4:
Place batteries into the battery pack. Replace the
back panel and screws.
Step 2:
Remove back drawer, peel reactor sticker off.
HOW TO SETUP YOUR MOSQUITO PREVENTER FOR THE FIRST TIME
Step 5:
Replace the back drawer into the Mosquito Preventer.
Step 6:
The power button will be continuously blinking, this
indicates that the Mosquito Preventer is in Maintenance
Mode.
Step 7:
Remove lid and umbrella. Fill the preventer with 3.2L
of either rain or distilled water. Check the water level
through the viewing window. Green means a good
water level, red means a bad water level and needs to
filled with more water.
Step 8:
Replace umbrella. Replace lid securely back onto the
preventer. Attach the rain guard onto the preventer.
Step 9:
Attach the landing strips to the Mosquito Preventer in
the indicated places.
Step 10:
Press the power button for 1 second and release to
reset the Mosquito Preventer.
Step 3:
Remove the screws holding the back panel in place
and remove the back panel.
3.2L
Remove
Before
Use
