©April 2017
Call Toll free at 800-269-7130
CIR-TM7000-G1 Revision 1.1
34
John C. Jensen
press
『
ENTER
』
to next setting. (This function is only for software versions greater than 1.09)
1.2.1.3.
SET UNIT:
Dot-matrix shows
【
SET UNIT
】
one time then shows
『
METRIC
』
, press
▲ or ▼ change to
【
ENGLISH
】
, press
『
ENTER
』
to proceed to next setting.
ENGINEERING MODE
1.2.1.4.
FAN SETTING:
Dot-matrix shows
【
FAN SETTING
】
one time then shows
『
ON
』
, press
▲ or ▼ change
to
【
OFF
】
, press
『
ENTER
』
to proceed to next setting.
1.2.1.5.
MIN SPEED:
Dot-matrix show
【
SET MIN SPEED THEN PRESS ENTER
】
, SPEED window shows
value, press
▲ or ▼ to set value, press
『
ENTER
』
to proceed to next setting.
1.2.1.6.
MAX SPEED:
Dot-matrix shows
【
SET MAX SPEED THEN PRESS ENTER
】
, SPEED window shows
value, press
▲ or ▼ to set value, press
『
ENTER
』
to proceed to next setting.
1.2.1.7.
MAX ELEVATION:
Dot-matrix shows
【
SET MAX ELEVATION THEN PRESS ENTER
】
, INCLINE
window shows value, press
▲ or ▼ to set value, press
『
ENTER
』
to proceed to next setting.
1.2.1.8.
Total Used Distance:
Dot-matrix shows
【
ODO
】
, DISTANCE
＆
TIME window shows total used
distance. Total used distance= TIME window value + (DISTANCE window value X 10000) , press
『
Reset/Clear
』
+
『
Enter
』
for 5 seconds to erase total used distance value, press
『
ENTER
』
to proceed
to next setting.
1.2.1.9.
Total Used Hours:
Dot-matrix shows
【
HRS
】
, TIME window shows total hours value, press
『
Reset/Clear
』
+
『
Enter
』
for 5 seconds to erase total used hours value, press
『
Enter
』
to go back to
idle mode.
Refer to the Engineering Service Manual for more detailed programming instructions.
