©April 2017
Call Toll free at 800-269-7130
CIR-TM7000-G1 Revision 1.1
29
John C. Jensen
CARE & MAINTENANCE
CARE & MAINTENANCE
Always remove the key and unplug the power cord before cleaning, lubricating, or performing any maintenance.
HOW DO I CLEAN MY MACHINE?
Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your treadmill and its
operating environment will keep maintenance problems and service calls to a minimum. For this reason, Customer Tech
Support recommends that the following preventive maintenance schedule be followed.
DAILY
•
Unplug the treadmill. Clean entire machine using water and a mild soap or other Green Series Fitness approved solution
(cleaning agents should be alcohol and ammonia free).
MONTHLY or QUARTERLY (depending on usage or dirty environments)
•
Unplug the treadmill and remove the motor cover. Check for debris and clean with a dry cloth and small vacuum nozzle.
DO NOT
vacuum directly on electronics board. Either blow with mouth or compressed air to clean electronic components.
WARNING
: Do not plug the treadmill in until the motor cover has been reinstalled.
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your equipment.
A
Use a soft, clean cotton cloth.
DO NOT
use paper towels to clean surfaces on the treadmill. Paper towels are abrasive
and can damage surfaces.
B Use a mild soap and damp cloth.
DO NOT
use ammonia based cleaner or alcohol. This will cause discoloring of the
aluminum and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface. This could cause electrocution.
D Wipe the console, heart rate grip, handles and side rails after each use.
E Brush away any wax deposits from the deck and belt area. This is a common occurrence until the wax is worked into the
belt material.
F Be sure to remove any obstructions from the path of the elevation wheels including power cords.
G For cleaning console displays, use distilled water in an atomizer spray bottle. Spray distilled water onto soft, clean, dry
cloth and wipe display until clean and dry. For very dirty displays, adding vinegar is recommended.
CAUTION
: Be sure to have proper assistance to install and move the unit in order to avoid injury or
damage to the treadmill.
