©April 2017
Call Toll free at 800-269-7130
CIR-TM7000-G1 Revision 1.1
15
John C. Jensen
UNPACKING & ASSEMBLY
6). Using a Torque wrench set to
20 ft/lbs
, tighten (8)
(#3-17)
bolts labeled
“A”
. The remaining (2)
bolts
(#3-17) located on the front of the console mast tubes
, labeled
“B”
, shall be torqued to
15
ft/lbs
. Verify that the console mast is secure and tight by
lifting up and down vigorously on the
handles with 50 to 100 pounds of force several times. If needed, re-torque to the specifications
outlined.
7). Re-check the handlebar bolts and the console mast to frame bolts to confirm that all of the bolts
are set to
20 ft/lbs.
8). Place (4) (#3-16) plastic caps into console lower cover.
9).
Slide the (2) console mast covers (#3-5, #3-6) and (2) packing (#3-9) down, and secure using (4)
M5x15mm screws.
(2) bolts “A” 20 ft/lbs
(2) bolts “A” 20 ft/lbs
(2) bolts “A” 20 ft/lbs
(2) bolts “A” 20 ft/lbs
(1) bolt
“B” 15 ft/lbs
Located at front.
(1) bolt
“B” 15 ft/lbs
Located at front.
