ZigBee Tracking Smart Socket
ZigBee Tracking Smart Strip
＊
Transmission Time: 6 seconds
＊
ZigBee Function: Router
＊
ZigBee Cluster: Simple Metering
＊
Installation type: 1
‐
phase & 3
‐
wire
＊
CT Meter Input Voltage:100~240V
＊
CT Meter Input Current: 60A
＊
CT Meter Frequency: 50/60Hz
＊
CT Meter Accuracy:
<
1% at PF=1
＊
Power Supply: Power acquired
from electrical meter
＊
ZigBee Link: 2.4GHz (IEEE 802.15.4)
＊
Wireless Range: 100 ft in open area
＊
ZigBee Profile: Smart Energy 1.0
＊
Security: AES 128 bits (Optional)
＊
Link up to 9 PowerLink energy
tracking devices
＊
ZigBee Function: Coordinator
＊
Proprietary remote outlet on/off
control
＊
Remote web browsing management
& power on/off control
＊
Remote real time Cost, KWH, CO2
usage information display
＊
RJ45 Ethernet Port Connection
＊
Power Supply: AC/DC adaptor
(included)
GREEN POWERLINK On-Line Energy Management Solution V1.0
4
GREEN POWERLINK On-Line Energy Management Solution V1.0
5
INSTALLATION
Wireless Setup Range
The energy gateway and smart socket/strip/CT meter communicate with
wireless
technology. To ensure the communication with no interruption,
please locate and setup energy gateway, smart socket/strip/CT meter within
100 Ft of range.
Install Smart Socket
The single outlet smart socket allows the user to track electricity consumption
of individual home appliance and protect it against surge and voltage spikes.
1. Plug in the smart socket to a powered AC outlet.
2. Plug in the appliance into the smart socket outlet.
3. The outlet power can be manually turned ON/OFF by pressing the “Manual
ON/OFF” button on the smart socket. You may also control the outlet power
remotely by using the energy monitor (see the operation instruction).
4. Perform initial energy monitor and smart socket pair up (see the operation
instruction).
PROTECTED LED LIGHT
This LED light illuminates
to indicate that the surge
protection is active and
protecting equipments
from power surges.
Manual ON/OFF”
button
M9PC020000
M9PG040000
