RANGE XT80/160 – TECHNICAL DOCUMENTATION
Page 10
2.3 Wiring
Connect the station to the electrical panel with the following protections:
Model
80 kW
100kW
120kW
140kW
160 kW
Input voltage
400 V
AC
400 V
AC
400 V
AC
400 V
AC
400 V
AC
Input current
120 A
rms
155 A
rms
185 A
rms
212 A
rms
242 A
rms
Power cable min cross section
1
(1)
(1)
(1)
(1)
(1)
Recommended Circuit breaker
at panel
2
(2)
(2)
(2)
(2)
(2)
As the RANGE XT is connected directly to the Mains Grid, there is no need of Earth Fault Current
Breaker.
1
•
The installer must define the power cable minimum cross section to be able to sustain the power
required by the charging station.
•
The sections must be assessed by the installer according to the length of the cable from power
distribution to charging station
2
•
The installer must define the types of HPC circuit breaker.
NOTE FOR SWITZERLAND
•
The NIBT standard does not requires DC terminals to be protected against direct fault currents.
