18
USER MANUAL - URBAN RYDER™
www.greenlightcycle.com
1-855-GRN-RYDE
(1-855-476-7933)
URBAN RYDER™ OPERATION: PRE-RIDE CHECKLIST
Pre-Ride Checklist and Familiarization Before Your First Ride
We want you to have a fun ride, but also a safe one. Carefully read the following information, even if you are an
experienced rider. The Urban Ryder™ can quickly reach high speeds; caution must be exercised when operating the bike.
Green Light Cycle Ltd.™ is the producer of this Owner’s Manual and assumes no responsibility for your personal safety. The
bike manufacturer assumes that you already know how to ride a bicycle and gives no instruction on basic riding skills, rules
of the road, Federal and Provincial Laws, or Motor Vehicle Regulations.
Urban Ryder™ Operation: Pre-Ride Checklist
!
!
!
!
!
!
!
!
!
!
WARNING:
You are the only person responsible for your personal safety when operating this electric bike
and you must be aware of its operation in any riding conditions.
WARNING:
Wear safety equipment when operating any bike. Dress to be seen with high visibility reflective
clothing.
WARNING:
Remember, bike helmets can save lives and help to avoid serious injury. Always wear an
approved helmet when riding any bike.
WARNING:
Never operate electronic handheld devices like cell phones, headsets or computers while riding.
WARNING:
Do not drink and ride.
Operation of Power Assisted Bicycle Controls
Bell
- Signals to traffic you are there.
Pedals
- Drive the bike forward.
Headlight
- LED light controlled by pressing the Mode and Up Arrow buttons at the same time.
Bike Keys
- turns the battery electrical supply off/on to the bicycle controls and locks the battery in place
on the bike.
King Meter®
- Controls the Pedal Assist speed level, records trip information, controls the headlight, and
turns thumb throttle “ON/OFF”.
Handlebars
- Contain the controls (King Meter®, Brakes, Gear Shifter, Bell, & Thumb Throttle), and steer the
bike left or right.
Brake Handles
- Stop the bike by squeezing the handle toward the hand grips. The brake handles also have kill
switches built in to them that stop the electricity flow to the motor, turning it off. Any time the
brakes are applied, the motor will stop pushing the bike in a forward direction.
Shimano® 7 Speed Shifter
- Switches between gears on the rear wheel to adjust ease of pedaling in order to climb grades
or ride at different speeds.
“10 Point” Check List - Before your First Ride and Every Ride After
1.
Battery is connected, locked, and charged.
2.
Electrical devices are working correctly.
3.
All nuts and bolts are tight.
4.
The front and rear wheels are secured to the bike frame and cam locks are tight.
5.
The tires are filled to the correct pressure, indicated on the tire side wall.
6.
The brakes are adjusted and operating correctly, including the brake kill switches.
7.
The seat is locked and the seat stem is adjusted to the correct height.
8.
Handlebars are tightened firmly.
9.
Chain and crank arms run smoothly and are lubricated.
10.
The rider is wearing appropriate high visibility reflective clothing, helmet, and eye protection.
