Green-Go Quad 4-wire, Быстрый старт

Страница: 5 / 13

__________________________________________________________________________________
Green-GO Quad 4-wire – Quick Start Guide
Set up a 4wire port as User based port
Set up a 4-wire port as User based Audio in and output. Audio can be sent from and received
by multiple channels simultaneously. Routing, cues and calls can be triggered via GPIO.
Mode: User
Channels
à
set up and alter individual channels for this 4-wire port.
1-32
à
Select one of the 32 available channel to assign a user or group to.
ID
à
ID of the user or group assigned to the channel
Group
à
Assign a group to the channel
User
à
Assign a user to the channel
None
à
Remove assigned group/user from the channel
Set Label à Set a different label for the channel
Group
à
Select a group label
User
à
Select a user label
Clear
à
Clear the label set
Talk
à
Set talk mode for this channel.
Disable
à
talk is disabled for this channel
Momentary
à
talk is enabled as long as a corresponding trigger is
active
Latch à talk is toggled between enabled or disabled when a trigger
becomes active
L atch/Momentary
à
A combination of latch and momentary. A short
activation will toggle the Latch and a long activation will act
Momentary.
Listen
à
Toggle the Listen on this channel on or off.
Volume
à
Set the volume for this channel. The range -24 dB through 12 dB.
Priority
à
Set the priority level of the channel - see also Priority dim in the
Options menu
Call Send à Enable or disable the possibility to send calls from this channel
Call Receive
à
Enable or disable the possibility to receive calls on this
channel
Bandwidth
à
Set up the used bandwidth for this input
Normal
à
7kHz bandwidth is used for this input
Enhanced
à
14kHz bandwidth is used for this input
An
à
Assign group to be handled as Announce Channel
Em
à
Assign group to be handled as Emergency Channel
Program Audio
à
Set up the Program Audio channel for this 4-wire port.
Mode
à
Select Normal or Local IFB. Normal mode will allow you to select .