7
Fit the two Back Door Handles to the Back Door using Pi
Clips.
8
Fit the Upper Back Wall using Pi Clips and then the Back
Door using Linch Pins. (When fitting, rest the bottom of
the Back Door in the slots in the Base first, push the
door onto the lugs, and slide the Back Door Handle
downwards to lock the Back Door.)
9
Fit the Side Roof Retainers, one on each side wall, using
Pi Clips.
Fit End Roof Retainers to the Front Wall and Upper Back
Wall using Pi Clips.
10
(Note: Skip this step for non-perch models) Slide the
Perches through the Left and Right Side Walls and
secure with Linch Pins at both ends.
11
Fit the Nest box End Walls and Nest Box Divider to the
Nest Box Floor, then add the Nest Box Front Wall, all
using Pi Clips.
12
Fit the nest box to the house by first inserting the L-lugs
into the lower holes on the Right Side Wall, then tilt the
nest box to push the three upper lugs through their
holes, before securing them inside the house with Linch
Pins.
Printed on recycled paper
© green frog designs limited 2010
Page 7 of 9
