Table 1- Error code definition
When an error appears, display will notice users by different codes, please refer to table 1 for
different codes :
The Electrical System is Now Ready!
• Fold the kickstand from the ground, then sit on the seat. Put one foot on the pedal and the other
on the ground.
• Now, start pedaling and the engine will go into action. There will be a faint rustle of the pass-
through.
• To maintain battery life, do not use it until its end. When the battery meter flashes, turn off the
power switch and use the pedal as a regular bicycle. After recharging, you can ride again with the
electric motor.
• Back Injury: The rear of the bike is not intended to carry people. Maximum load is up to 25 kg,
and the luggage should be tied with straps and tested during riding.
• Park in a safe place that is not an obstacle to vehicles or pedestrians. Place the bike on the
kickstand, disconnect the power with the main switch and pull the key out of the lock.
Code(Decimal)
Signification
0
Normal
6
Low Battery level
7
Motor error
8
Throttle error
9
Controller error
10
UART receive error
11
UART receive error
