Gree MULTI21 CAS12HP230V1AC, Руководство по установке

Страница: 14 / 24

INSTALLATION OF POWER AND WIRING
4. Secure all wires inside wire clamp/strain relief. Verify wires are secure, not loose and no external
force on wires affects the connections at the terminals.
NOTE:
Crossing interconnecting wires will cause system malfunction and possible damage.
5. Replace field wiring cover on unit.
Local codes may require a disconnect switch within sight of the indoor unit. Use a DFS
Disconnect Switch Accessory Kit (Part No: DFS-SWITCH-A) to break interconnecting wires going
to the N(1), 2, 3, terminals on the indoor unit, as shown in the wiring diagram below:
Step 9 – Installing Wired Controller to Ceiling Cassette
1. Open decorative grille and locate 4 pin connector for wired controller on Ceiling Cassette main
body
2. Route wired controller wires to 4-pin connector and connect wired controller to ceiling cassette.
NOTE: The maximum wire length is 65-ft (20m) for a Wired Controller.
1. Replace decorative grille being careful not to pinch wires.
2. Remove back plate from Wired Controller.
14