116
Installation and Maintenance
Service Manual
Steps
8.Remove motor
motor
Twist off the tapping screws fixing the motor, pull
out the pin of leading wire for motor and then
remove the motor.
Procedure
9.Remove motor support
motor support
Twist off the tapping screws fixingthe motor
support, pull it upwardsand then remove the
motor support.
Unsolder the spot weld of 4-way valve assy,
electronic expansion, compressor and condenser,
and then remove the 4-way valve assy and
electronic expansion sub-assy.
Note:
When unsoldering the spot weld, wrap the 4-way
valve with wet cloth completely to avoid
damaging the valve due to high temperature.
10.Remove 4-way valve assy and electronic expansion
valve assy
electronic expansion
valve assy
4-way valve assy