Gree GWH09RA-K3DNA1A, Руководство по обслуживанию

Страница: 21 / 73

18
Function and Control
LIGHT: 15
Press LIGHT button to turn on the display's light and press this button again to turn off the display 's light. If the light is turned
on , is displayed. If the light is turned off, disappears.
SLEEP: 9
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is available
in COOL , HEAT (Only for models with heating function) or DRY mode to maintain the most comfortable temperature
for you.
Pressing TEMP button, (set temperature), (indoor ambient temperature) and (outdoor ambient temperatur)
and blank is displayed circularly . The unit defaults not to display the icon. During operation of TEMP button, the set temp-
erature is always displayed.
Note: Outdoor ambient temperature is only displayed for some models.
CLOCK :
12
TIMER ON :
TIMER OFF :
11
13
TURBO:
10
14
TEMP:
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
Press CLOCK button, blinking. Within 5 seconds, pr or - button adjusts the pressent time. Holding down either
button above 2 seconds increases or decreases the time by 1 minute every 0.5 second and then by 10 minutes every 0.5
second. During blinking after setting, press CLOCK button again to confirm the setting,and then will be constantly dis-
played.
After press of this button, disappears and "ON "blinks. 00:00 is displayed for ON time setting. Within 5 seconds, press
+ or - button to adjust the time value. Every press of either button changes the time setting by 1 minute. Holding down either
button rapidly changes the time setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press TIMER ON
button to confirm.
X-FAN:
16
Pressing X-FAN button in COOL or DRY mode,the icon is displayed and the indoor fan will continue operation for 10 min-
utes in order to dry the indoor unit even though you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,FAN or HEAT mode.
Press this button to activate / deactivate the Turbo function which enables the unit to reach the preset temperature in the
shortest time. In COOL mode, the unit will blow strong cooling air at super high fan speed. In HEAT mode, the unit will blow
strong heating air at super high fan speed.
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again.TIMER OFF
setting is the same as TIMER ON.
Press "+ " and "- " buttons simultaneously to lock or unlock the keypad. If the remote controller is locked,
is displayed
. In this case, pressing any button, blinks three times.
At unit OFF, press
"
MODE
"
and
" - "
buttons simultaneously to switch between and .
Combination of "+" and "-" buttons : About lock
17
Combination of "MODE " and "-" buttons : 18
About switch between Fahrenheit and centigrade
Press “TEMP” and “CLOCK” simultaneously in COOL mode to start energy-saving function. Nixie tube on the remote controller
displays “SE”. Repeat the operation to quit the function.
Combination of " TEMP " and "CLOCK" buttons : About Energy-saving Function 19