Gree GWH09KF-A3DNB1A, Установка, обслуживание и устранение неисправностей

Страница: 25 / 130

25
9) X-Fan
Allows fan to run after cooling cycle to dry off the coil and inhibit the growth of bacteria and mildew. Works
with “Auto” mode.
10)Temp Button
Toggles the display between set temperature, indoor temperature and outdoor temperature.
11) Timer On Button
Press TIMER button at unit ON to set TIMER OFF; HOUR OFF blinks. Press TIMER button at unite OFF to set
TIMER ON; HOUR ON blinks. In this case, pr or - button changes time setting. Holding down either
button rapidly changes time setting (time setting range 0.5 - 24 hours). Press TIMER button again to confirm
setting; HOUR ON/OFF stops blinking. If there is not any operation of button within 5 seconds during HOUR
ON/OFF blinking, TIMER setting will be canceled.
12) Turbo Button
Boost the cooling or heating airflow, allowing the unit to reach the preset temperature in the shortest amount of
time.
13) Sleep Button
Press this button to go into the SLEEP operation mode. Press it again to cancel this
function. This function is available in COOL , HEAT (Only for models with heating
function) or DRY mode to maintain the most comfortable temperature for you.
14) Light Button
Turns the light on the indoor display on and off.
15) Combination of “+” and “-” Buttons
Press “+” and “-” buttons simultaneously to lock or unlock the keypad
16) Combination of “Mode” and “-” Buttons
Press “Mode” and “-” buttons simultaneously will switch between Fahrenheit and Centigrade.
Remote Control Functions
Product Introduction