Gree GWC09KF-D3DNA5A, Руководство по обслуживанию

Страница: 30 / 78

27
Function and Control
+
:
FAN :
4
3
5
Press this button to decrease set temperature.Holding it down above 2 seconds rapidly
.
decreases set temperature. In
Press this button to increase set temperature.Holding it down above 2 seconds rapidly increases set temperature. In
This button is used for setting fan speed in the sequence that goes from AUTO,
,
to then back to Auto.
,
,
Auto
Low speed
Medium speed High speed
:
6
Press button to start or stop up & down swing function.The remote controller defaults to simple swing condition.
Press + button and button at the same time at unit OFF to switch between simple swing and static swing,
blinking 2 seconds.
In static swing condition, press
If the unit is turned off during swing operation,the louver will stop at present position.
button, the swing angle of up & down louver changes as below:
●
●
●
●
AUTO mode, set temperature is not adjustable.
AUTO mode, set temperature is not adjustable.
HEALTH SAVE:
Press HEALTH part of this button to turn on or off HEALTH function.
7
X-FAN:
9
10 TEMP:
:
8
Pressing X-FAN button in COOL or DRY mode,the icon "X-FAN" is displayed and the indoor fan will continue operation
for 10 minutes in order to dry the indoor unit even though you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,FAN or HEAT mode.
Pressing TEMP button, (set temperature), (indoor ambient temperature) and (outdoor ambient
temperatur) is displayed circularly .The unit defaults not to display the icon. During operation of TEMP button, the set
temperature is always displayed.
Note: Outdoor ambient temperature is only displayed for some models.
Pressing SAVE part of this button,
and the unit goes into SAVE operation mode. Press SAVE part of the button again to cancel SAVE function .During
SAVE operation, the tmperature and fan speed is not adjustable.
is displayed
Press + button and button at the same time at unit OFF to switch between simple swing and static swing,
Press button to start or stop left & right swing function.The remote controller defaults to simple swing condition.
blinking 2 seconds..
In static swing condition, press button, the swing angle of left & right louver changes as below:
●
●
●
If the unit is turned off during swing operation,the louver will stop at present position.
●