Names and functions of wireless remote control
Ɣ
ON/OFF button
ON/OFF
Remote control
Note: Heat mode is not
available on this unit
Signal transmitter
Ÿ
Ÿ
ŸŸ
Ÿ
AUTO
COOL
DRY
FAN
HEAT
Fan 2
Fan 1
Fan 3
Fan 4
Note: Be sure that there are noobstructions between receiver and remote controller; Don't drop or throw
Remark: Any operate and explain for heating in this manual is
Ɣ
Press this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
MODE button
MODE
Auto mode is default while power on.
Under Automode,the temperature will not
be displayed; Under Heatmode, the
Ɣ
Press this button, Sleep On and Sleep
Off is defaulted. After the unit is turned off,
the Sleep function is canceled. After Sleep
Under Fan and Auto modes, this function is
not available.
Off can be selected. After powered on,Sleep
SLEEP button
Note:Swing mode is not available on this unit
SLEEP
Ɣ
By pressing this key,you may select AUTO,
FAN 1, FAN 2, FAN 3 or FAN 4, and may also
cycle between them. FAN 4 only in cool mode.
After being energized, AUTO is defaulted. Only
FAN button
FAN
initial value is 28
C
(
o
o
F); Under other
82
modes,the initial value is 25
C
(
o
o
F).
77
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
(Note:When select Fan 4, the fan speed is
same as fan3 on this unit)
Ɣ
SWING button
SWING
Press this key to activate or deactivate
Note:Not available on this unit
the swing.
AUTO
COOL
DRY
FAN
HEAT
-17-
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction;
For some function,
OPERATION OF WIRELESS REMOTE CONTROL
(Only for cooling and heating unit
.
As for cooling only unit, it won’t have
anyaction when it receives the signal
of heating operation.)
which the model doesn't have, if press the
corresponding button on the remote controller
the remote control; Don't let any liquid in the remote control and put the remote control directly under the
only for cooling and heating unit, but this is a cooling only unit, so it is not available on this unit.
AUTO
that the unit will keep the original
runningstatus.
sunlight or any place where is very hot.
function set up, the signal of Sleep
will
display.
In this mode,the time of timer can be adjusted.
this key can not adjust the fan
sreed, but can send
LOW fan can be set
under DRY mode, pressing
message.
