Gree GPC08AI-A3NNC6A, Руководство пользователя

Страница: 20 / 26

Remote control
Ɣ
+ button
+
Ɣ
Presetting temperature can be decreased.
Press this button, the temperature can be
- button
-
set up, continuously press this button and hold
contents can
( F) signal
The
ailable
can
be sent by if pressing this button.
For presetting temperature increasing.
Press this button,can set up the temperature,
when unit is on . Continuously press and
hold this button for more than 2 seconds,
the corresponding contents will be
changed rapidly, until unpress the button
laying all along. In Auto mode, the temp-
erature can not be set up, but operate this
button can send the signal. Centigrade
setting range :16-30; Fahrenheit scale
setting range 61-86.
then send the information, is disp-
Ɣ By pressing this key under switch-off state,you
setting is 0.5 ~ 24 hours. The characters "T-ON"
and "H" will flash for 5 seconds. Within 5 seconds,
you may make one press of this key to complete
the sttingand send the message.If the setting is
valid, the set time will be displayed for 2 seconds
before display of the temperature message.During
and press "-" key to decrease
the value. The time will
increase or decrease by 0.5 hours with each press
of this key.If pressing "+" or "-" key continuously,
timer setting, and there is no display of "T-ON" or
cancel the auto switch-on.When the temperature
"T-On" and "H" will display constantly for 2 seconds.
TIMER button
TIMER
0.25 seconds. After being energized, the fault is no
"H". Press ON/OFF key to switch on the unit and
By pressing this key under switch-on state, set the
The method of setting as the same as for auto switch-on.
Ɣ
-18-
C
(
F
)
OPERATION OF WIRELESS REMOTE CONTROL
this button
for two seconds, the relative
quickly change, until unhold
and send the order that the C
will be displayed all the time.
temperature adjustment is unav-
under the Auto mode, but the order
time for auto switch-off.
After 2 seconds,the preset temperature will be displayed.
cancel the auto switch-on and send the message.you may.
within these 2 seconds,you may press this key again to
troller can increase the set time by 0.5 hours every
display becomes constant, you maypress this key
may set the time for auto switch-on. The range of
flash,you may press "+" key to increase the value
the time value will change rapidly.The remote con
again to display the remaining set time. The time value,