Removing Collected Water
1. In cooling or drying operation, the condensation water will be drained to the
■ Drainage way as follows.
chassis and spattered by water-striking motor.
As the temperature of condenser
is high, most of the condensation water will be evaporated a
nd drained to
outdoor. So usually, only a little condensation water will be accumulated inside
the chassis and you do not need to disc
harge the water frequentl
y.
2. When the chassis is full with wate
r
, the buzzer will give out 8 sounds and "H8" is
displayed to remind user to discharge water:
● Move the unit to a suitable place for discharging water;
do not tilt the unit and
keep it horizontal during moving;
●
T
ake the drainage pipe from the clip
and pull out the rubber plug on the
drainage pipe to discharge water;
●
After full water protection is eliminated and the compressor has been stopped
for 3 minutes, the unit will resume operation.
2
0
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
