Gree GMV-NX140P/A(X1.2)-K, Руководство пользователя

Страница: 5 / 31

Multi Variable Air Conditioners Fresh Air Series Indoor Unit
1
1 Safety Notices (Please be sure to abide them)
WARNING: If not abide them strictly, it may cause severe damage to the unit or the
people.
NOTE: If not abide them strictly, it may cause slight or medium damage to the unit or the
people.
This sign indicates that the items must be prohibited. Improper operation may cause
severe damage or death to people.
This sign indicates that the items must be observed. Improper operation may cause
damage to people or property.
WARNING!
This product can’t be installed at corrosive, inflammable or explosive environment or the
place with special requirements, such as kitchen. Otherwise, it will affect the normal
operation or shorten the service life of the unit, or even cause fire hazard or serious injury.
As for the above special places, please adopt special air conditioner with anti-corrosive or
anti-explosion function.
Follow this manual to complete
the installation work. Please
read this manual carefully
before turning on or repairing
the unit.
Installation should be
conducted by the dealer or
qualified personnel. Please do
not attempt to install the air
conditioner by yourself.
Improper installation may lead
to water leakage, electric shock
or fire hazard, etc.
Before installation, please
check whether the power
supply is complied with that
specified on the nameplate and
check the safety of the power
supply. The air conditioner must be
grounded reliably for avoiding
electric shock. Please do not
connect the earthing wire to
gas pipe, water pipe, lightning
rod or telephone line.
Be sure to use special
accessories and parts for
installation to prevent water
leakage, electric shock and fire
hazard, etc.
If refrigerant leakage happens,
please ventilate the room
immediately.
Diameter of power cord should
be large enough. The damaged
power cord and connection wire
must be replaced with special
cables.
When the power cord is
connected, please fix the
electric box cover properly to
avoid safety accidents.
Never fail to comply with the
nitrogen-charging welding
process. Do charge nitrogen
when welding the pipes.
Never short circuit or cancel the
pressure switch to prevent unit
damage.