Multi Variable Air Conditioners Ducted Type Indoor Unit
20
6 Setting of External Static Pressure
Working range for external static pressure of this series of duct type unit is 0 Pa~200 Pa. For
corresponding external static pressure to the respective static pressure notch please see as below.
The setting of static pressure for indoor fan can be done via wired controller and Gree debugging
software. For specific setting method please see the Wired Controller Instruction Manual or Gree
Debugging Software Instruction Manual.
Applicable to: GMV-ND22
～
50PHS/B-T
Static pressure notch for indoor fan
2
3
4
5
6
7
8
9
External static pressure (Pa)
0
20
40
60
80
100
120
150
Applicable to: GMV-ND56
～
160PHS/B-T
Static pressure notch for indoor fan
2
3
4
5
6
7
8
9
External static pressure (Pa)
0
30
60
90
120
150
180
200
Note: The defaulted static pressure notch for all models at ex-factory is 5.
7 Routine Maintenance
Warning!
①
Do turn off the unit and cut off the main power supply when cleaning the air conditioner to
avoid electric shock or injury.
②
Stand at solid table when cleaning the unit.
③
Do not clean the unit with hot water whose temperature is higher than 45°C to prevent fade
or deformation.
④
Do not dry the filters by fire, or it may catch fire or become deformed.
⑤
Clean the filter with a wet cloth dipped in neutral detergent.
⑥
Please contact after-sales service staff if there is abnormal situation.
7.1 Cleaning of Filter
(1) Remove the filters from inlet of IDU. Use a vacuum cleaner to remove dust. If the filters are
dirty, wash them with warm water and mild detergent, and dry the filters in the shade.
(2) If the unit used in the environment with much dust, please clean it regularly. (Usually once
every two weeks).
7.2 Maintenance before the Seasonal Use
(1) Check if the air inlet and air outlet of indoor and outdoor unit are blocked.
(2) Check if securely grounded.
(3) Check if all the power cord and communication cable are securely connected.
(4) Check if any error code displayed after energized.
7.3 Maintenance after the Seasonal Use
(1) Set the unit in fan mode for half a day in a sunny day to dry the inner part of unit;
(2)
When the unit won’t be used for a long time, please cut off power supply for energy saving;
the characters on the wired controller screen will disappear after cutting off the power
supply.
Содержание GMV ND50PHS/B-T
Страница 25: ......
