background image

Multi Variable Air Conditioners Wall Mounted Type Indoor Unit 

Any personal injury or property loss caused by improper installation, improper debug, and 

unnecessary repair or not following the instructions of this manual should not be the responsibility of 
Gree Electric Appliances, Inc. of Zhuhai. 

2 Product Introduction 

2.1 Outline of the Unit and Main Parts 

 

Fig. 2.1 

NOTE 

The appearances will be different by the different models of air conditioners. 

No. 

Part Name 

No. 

Part Name 

 

Surface panel 

 

Guide louver 

 

Filter 

 

Drain pipe 

 

Wiring cover 

 

 

2.2 Rated Operating Condition 

Item 

  Indoor Side Condition 

  Outdoor Side Condition 

Dry Bulb Temp°C (°F)  Wet Bulb Temp°C (°F)  Dry Bulb Temp°C (°F)  Wet Bulb Temp°C (°F) 

Rated Cooling 

27(80.6) 

19(66.2) 

35(95) 

24(75.2) 

Rated Heating 

20(68.0) 

15(59.0) 

7(44.6) 

6(42.8) 

Indoor Unit Working Temperature Range: 16°C(60.8

°F) 

~32°C(89.6

°F)

 
 
 

(26)  Volatile liquid, such as diluent or gasoline, will damage the appearance of air conditioner. Only soft dry cloth and 

wet cloth dipped with neutral detergent can be used to clean the outer case of air conditioner. 

(27)  If there are any abnormal circumstances (such as burning smell, etc.), please turn off the unit and cut off the main 

power supply immediately, and then contact Gree appointed service center. If those abnormal circumstances still 
exit, the unit may be damaged and it may lead to electric shock or fire hazard. 

(28)  Under the standby status, the air conditioner will consume a little power for ensuring reliability of complete air 

conditioner, maintaining normal communication and preheating refrigerant. When the unit won’t be used for a 
long time, cut off the power of the complete air conditioner. However, please preheat it when operating the unit 
next time. 

Содержание GMV-ND06G/B4B-T





















Отзывы: