Gree GMV-ND06G/B4B-T, Руководство пользователя

Страница: 12 / 20

Multi Variable Air Conditioners Wall Mounted Type Indoor Unit
8
tool.
2) Loosen the wiring screws on terminal board.
3) Insert the wire into the ring tongue terminal and tighten by crimping tool.
4) Use the screwdriver for tightening the terminal.
Unit: mm(inch)
Fig. 5.1.1 Fig. 5.1.2
5.2 Power Cord Connection
NOTE
All indoor units must be unified of power supply so that they can be powered ON/OFF at the same
time.
Fig. 5.2
For units with single-phase power supply.
(1) Detach the electric box lid.
(2) Let the power cord pass through the wiring through-holes.
(3) Connect the power cord to the L1, L2 terminals and the grounding screw.
(4) Fix the power card with wiring clamp.
(5) The wire diameter of power cord can’t be less than 18AWG.
5.3 Connection of Communication Line of IDU and ODU
(1) Open the cover of electric box of indoor unit.
(2) Lead the communication line across the rubber ring.
(3) Connect the communication line to terminal D1 and D2 on the 4-digit wiring board of indoor
unit, as shown in Fig. 5.3.1.