●
TIMER OFF:
At on status, press this button can set TIMER OFF. Refer to the TIMER ON for details.
Cancel timer:
Under timer status, press “DELAY” button again.
Time setting range
Cooling only unit type: 1-24h
Replacement of Batteries in Remote Controller
1.
Signal sender Battery
2.
Reinstall
Remove
3. Reinstall the cover of battery box.
Cover of battery box
●
The distance between signal sender and receiving window should be no more than 8m, and there should be no
●
conditioner when using the remote controller.
Replace new batteries of the same model when replacement is required.
When you don’t use remote controller for a long time, please take out the batteries.
14
6
- / + button
Under timer setting status, after each pressing of “+” or “-” button, time will increase or decrease 1h. Hold “+” or “-” button,
2s later, time displayed on dual-8 nixie tube will change quickly. Loosen the button until the time is reached to your set time.
Note:
●
As for cooling only unit, after each pressing “+” or “-” button, time will increase or decrease 1h.
As for electric heating mode, when setting time within 10hours, after each pressing “+” or “-” button, time will increase
or decrease 0.5h; when setting time is among 10-24h, after each pressing “+” or “-” button, time will increase or
decrease 1h.
●
●
Note:
●
Press the back side of remote controller marked
the cover of battery box along the arrow direction.
Replace two 7# (AAA 1.5V) dry batteries, and
make sure the position of “+” polar and “-” polar
are correct.
●
●
5
SLEEP button
Press this button to go into the SLEEP operation mode. Press any button to cancel this function. This function can be
started up under fan mode and cooling mode. Under cooling mode, the unit operates at low fan speed and it
automatically adjusts the temperature; under fan mode, the unit operate at low fan speed.
TIMER ON:
At off status, press this button and press “+” or “-” button within 5s can set time for TIMER ON. After each
pressing of “+” or “-” button, time will increase or decrease 0.5h or 1h. If hold “+” or “-” button, time will change quickly
after 2s. Loose the button until reaching to your required time. 5s later,
7
DELAY button
Press this button can set TIMER ON and TIMER OFF.
●
Note:
obstacles between them.
