11
AIR CONDITIONER USE
The display always shows the room temperature except when setting the Set temperature or the Delay timer.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Operating your air conditioner properly helps you to obtain the
best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
If you turn off the air conditioner, wait at least 3 minutes
before turning it back on. This prevents the air conditioner
from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode
when outside temperature is below 65 °F (18°C). The inside
evaporator coil will freeze up, and the air conditioner will
operate properly.
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
This is a general use remote controller, it could be
used for the air conditioner swith multifunction; For some
function, which the model doesn't have, if press the
corresponding button on the remote controller that the unit
will keep the original running status.
Starting Your Air Conditioner— Digital Control
Note:
If no button press for 2 minutes,all LED brightness is off directly.
1
Power button
2
Mode button
3
Fan Speed button
4
Sleep button
5
Delay 1-24hr button
7
display on dual-8 nixie tube
6
+ /
button
-
5
4
3
2
1
6
7
Auto speed indicator
High speed indicator
Medium speed indicator
Low speed indicator
Cooling indicator
Eco indicatorfan
Fan indicator
Timer indicator
Sleep indicator
6
2
Mode button
Press this button can your required operation mode in turn. Corresponding indicator will be on.
●
Cool:
Under this mode, air conditioner operates under cooling mode. Cooling indicator will be on. Press “Fan Speed”
●
Fan Only:
Under this mode, air conditioner will not cool or heat, only blow wind. Fan indicator will be on. Press “Fan
●
Energy Save:
Under this mode, air conditioner operates under SE mode. SE indicator will be on. Press “Fan Speed”
button can adjust the fan speed.
Cool
Fan
Only
Energy
Save
1
Power button
Press this button can turn on or turn off air conditioner.(After energization or restart up the unit or timer on, the unit will
operate at SE mode; If power failure during operation of the unit, it will operate at the operation status before power failure.)
Function and Control
button can adjust the fan speed.
Speed” button can adjust the fan speed. (No auto fan speed under fan mode).
