Introduction for buttons on remote controller
T-ON/T-OFF
Press "
" button to turn on or turn off WiFi function. When
WiFi function is turned on, the "
" icon will be displayed on
remote controller; Under status of remote controller off, press
"
" and "
i " buttons simultaneously for 1s, WiFi module
will restore to factory default setting.
WiFi
Press CLOCK, blinking. Within 5 seconds, pressing
▲
or
button adjusts the present time. Holding down either button above
2 seconds increases or decreases the time by 1 minute every 0.5
second and then by 10 minutes every 0.5 second. During
blinking after setting, press CLOCK again to confirm the setting
and then will be constantly displayed.
CLOCK
Under unit off, press this button and hold for 3s to open the air
guide louver, icon is displayed in indoor unit. When air
guide louver is open to the maximum, and icon was disappear,
you could clean the unit. Cancel this function: Press and hold for
3s to reset the air guide louver. If you press the power button
directly, the unit will be turned on.
T-ON button
"T-ON" button can set the time for timer on. After pressing this
button, " " icon disappears and the word "ON" on remote
controller blinks. Press
"▲"
or " " button to adjust TIMER ON
setting. After each pressing
"▲"
or " " button, TIMER ON setting
will increase or decrease 1min. Hold
"▲"
or " " button, 2s later,
the time will change quickly until reaching your required time.
Press "T-ON" to confirm it. The word "ON" will stop blinking. " "
icon resumes displaying. Cancel TIMER ON: Under the condition
that TIMER ON is started up, press "T-ON" button to cancel it.
T-OFF button
"T-OFF" button can set the time for timer off. After pressing this
button," " icon disappears and the word "OFF" on remote
controller blinks. Press "
▲
" or " " button to adjust TIMER OFF
setting. After each pressing "
▲
" or " " button, TIMER OFF setting
will increase or decrease 1min. Hold "
▲
" or " " button, 2s later,
the time will change quickly until reaching your required time.
Press "T-OFF" word "OFF" will stop blinking. " " icon resumes
displaying. Cancel TIMER OFF. Under the condition that TIMER
OFF is started up, press "T-OFF" button to cancel it.
Note:
Under on and off status, you can set TIMER OFF or TIMER ON
simultaneously. Before setting TIMER ON or TIMER OFF, please
adjust the clock time. After starting up TIMER ON or TIMER OFF,
set the constant circulating valid. After that, air conditioner will be
turned on or turned off according to setting time. ON/OFF button
has no effect on setting. If you don’t need this function, please use
remote controller to cancel it.
▲
▲
▲
▲
▲
▲
▲
38
