9
Place the air conditioner on the sill with the
Lower
Guide Rail
against the back edge. Center the unit,
and close the window securely behind the
Upper
Guide Rail
. The unit should be slightly tilted to the
outside. Use a level: about 1/3 bubble will show
correct slant.
To install the fixed bracket, attach the bracket to the
window side sash with
1 Type B Screw
. This prevents
broken glass or damage to the windows.
Front View
Side View
Vinyl
Window
Wooden
Window
NOTE:
Top Rail and sliding panels at each side are offset to provide the proper pitch to the
rear of .8 cm (5/16”). This is necessary for proper condensed water utilization and drainage. If
you are not using the side panels for any reason, this pitch to the rear must be maintained.
5
6
8
INSTALLATION INSTRUCTIONS
NOTICE:
This picture is for reference only. Please refer to the actual product for the appearance.
BACK
FRONT
Upper Guide
Rail
Lower Guide
Rail
Window Frame
Horizontal or inclined about 3°
To install the
Window Sash Seal
, cut the seal to
fit the length of the window. Peel off the backing,
and attach to window sash and window sill.
Note:
To install the air conditioner onto
the window sill, it is recommended to use 2
PEOPLE.
Extend the left and right
Flexible Screens
to the
window sashes. Install
2 Type B Screws
in holes in the
upper
Flexible Screen
Frame and
1 Type B Screw
into middle of Upper Guide Rail. Attach bottom of the
Flexible Screen
Frame to the window sill, with
2 Type
B Screws
.
Note:
In order to prevent the window
sill from splitting drive the pilot holes before
inserting the screws.
Window
Sill
Window
Frame
Type B Screws (2)
Type B Screws (3)
7
