Gree FP-102BA2/B-D, Руководство по обслуживанию

Страница: 34 / 67

Wall Mounted Type
Fan Coil Unit Service Manual
32
INSTALLATION
1 INSTALLATION OF THE UNIT
1�1 Important Notices
(1) The unit installation work must be done by qualified personnel according to the local rules and this
manual.
(2) Before installing, please contact with local authorized maintenance center, if unit is not installed by the
authorized maintenance center, the malfunction may not be solved, due to discommodious contacts.
(3) When removing the unit to the other place, please firstly contact with the authorized Maintenance Center
in the local area.
1�2 Basic Requirements For Installation Position
Install in the following place may cause malfunction. If it is unavoidable contact with service center please:
(1) Place where strong heat sources, vapors, flammable gas or volatile object are emitted.
(2) Place where high-frequency waves are generated by radio equipment, welders and medical equipment.
(3) Place where a lot of salinities such as coast exists.
(4) Place where the oil (machine oil) is contained in the air.
(5) Place where a sulfured gas such as the hot spring zones is generated.
(6) Other place with special circumstance.
1�3 Indoor Unit Installation Position Selection
(1) The air inlet and outlet vent should be far away from the obstruction.
(2) Select a position where the condensing water can be easily drained out.
(3) Select a location where the children can not reach.
(4) Select the place that is strong enough to withstand the full weight and vibration of the unit. And will not
increase the noise.
(5) Be sure to leave enough space to allow access for routine maintenance. The height of the installed
location should be 250cm or more from the floor.
(6) Select a place about 1m or more away from TV set or any other electric appliances.
(7) Select a place where the filter can be easily taken out.
(8) Make sure that the unit installation should accord with installation dimension diagram requirements.
(9) Do not use the unit in the immediate surroundings of a laundry a bath a shower or a swimming pool.
1�4 Safety Requirements For Electric Appliances
(1) The power supply should be used the rated voltage and AC exclusive circuit, the power cable diameter
should be satisfied.
(2) Don't drag the power cable emphatically.
(3) It should be reliably earthed, and it should be connected to the special earth device, the installation work
should be operated by the professional.
The air switch must have the functions of magnetic tripping and heat tripping, in order to protect the short
circuit and overloading.
(4) The min. distance from the unit and combustive surface is 1.5m.
(5) The appliance shall be installed in accordance with national wiring regulations.
(6) An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be
connected in fixed wiring.
Note:
①
Make sure that the Live wire or Zero line as well as the earth wire in the family power socket can not be
wrong connected, there should be reliable and no short circuit in the diagram.
②
Wrong connection may cause fire.
1�5 Earthing requirements
(1) Air conditioner is type I electric appliance, thus please do conduct reliable earthing measure.
(2) The yellow-green two-color wire in air conditioner is earthing wire and cannot be used for other propose.
It cannot be cut off and be fix it by screw, otherwise it would cause electric shock.
(3) The earth resistance should accord to the National Criterion.
(4) The user power must offer the reliable earthling terminal. Please don't connect the earthing wire with the
following place:
①
Tap water pipe
②
Gas pipe
③
Contamination pipe.
④
Other places that professional personnel consider them unreliable.
(5) The model and rating values for fuses according the silk print on fuse cover or related PCB board.