Gree FP-102BA2/B-D, Руководство по обслуживанию

Страница: 26 / 67

Wall Mounted Type
Fan Coil Unit Service Manual
24
See Fig.16 for how to activate the “ Turbo ” function.
TURBO
MEMORY SAVE BLOW
TURBO
MEMORY SAVE BLOW
MEMORY SAVE BLOW
When the “ Turbo ”
function is not activated
Press “ Function” to go
to the setting status
Press “ Enter/cance l”
to active the “Turbo”
function
See Fig.17 for how to deactivate the“ Turbo ” function.
TURBO
MEMORY SAVE BLOW MEMORY SAVE BLOW
TURBO
MEMORY SAVE BLOW
When the “ Turbo ”
function is activated
Press “ Function ” to go
to the setting status
Press “ Enter/cancel ” to
deactivate the “Turbo”
function
Fig.17 How to Deactivate the “ Turbo ” Function
NOTE:
①
The “ Turbo ” function is deactivated when the unit is powered on after power failure.
②
Under the “ Dry ” and “ Fan ” modes, the “ Turbo ” function is unavailable and the symbol “ ”will not
appear.
③
The “ Turbo ” function will be deactivated automatically when the “ Quiet ” function is activated.
④
The “ Turbo ” function will be deactivated automatically when the “ Fan ” speed is adjusted.
4�9 Save
(1) “ Save ” Function
1) This function is intended to save energy through limiting the temperature range under “ Cool ”, “ Dry ” or
“ Heat ” mode.
2) The set temperature range for energy saving under the “ Cool ” or “ Dry ” mode is from the set point to
30°C .
3) The set temperature range for energy saving under the “ Heat ” mode is from 16°C to the set point.
(2) How to set the “ Save ” function under the “ Cool ” mode.
1) When the unit is “
On
”, press “
Function
” to go to the setting state of the “
Save
” function with the symbol“
” flashing.
2) Press the “▲” or“▼” key to adjust the set temperature.
3) Press the “ Enter/Cancel ” key to activate the “ Save ” function.
(3) How to set the “ Save ” function under the “ Heat ” mode.
1) When the unit is “ On ”, press “ Function ” to go the setting state of the “ Save ” function with the symbol“
” flashing.
2) Press “ Mode ” to switch to the setting status for heating.
3) Press “▲”or “▼” to adjust the set temperature.
4) Press “ Enter/Cancel ” to activate the save function.
(4) How to deactivate the “ Save ” function:When the “ Save ” function is activated, press the “ Function ” key to
go to the setting state of this function with the symbol“ ”flashing, after that, press the“ Enter/Cancel ” key to
cancel the “ Save ” function and the symbol will disappear.