Gree FP-102BA2/B-D, Руководство по обслуживанию

Страница: 23 / 67

21
Wall Mounted Type
Fan Coil Unit Service Manual
CONTROL
21
CONTROL
4�5 Swing
How to activate the “ Swing ” function: under the “ On ” status of the unit, press the “ Function ” key to go to
the setting status with the symbol“ ”flashing, and then press “ Enter/Cancel ” to make a confirmation and the
symbol“ ”will stop flashing.
How to deactivate the “ Swing ” function: under the “ On ” status of the unit, press the “ Function ” key to go to
the setting status with the symbol“ ”flashing, and then press “ Enter/Cancel ” to deactivate this function and
the symbol will disappear.
See Fig. 10 for how to activate the “ Swing ” function.
When the “ Swing”
functions is not activated
Press “ Function ” to go
to the setting status
Press “
Enter/cancel
”
to activate the “
Swing
”
function
See Fig.11 for how to deactivate the “ Swing ” function.
When the “ Swing ” is
activated
Press “ Function ” to go
to the setting status
Press “ Enter/cance l” to
deactivate the “ Swing ”
function
NOTE: If the setting of the swing function is “ Off ”, the swing angle may change after the unit is powered
on again.
4�6 Timer
Under the “ On ” or “ Off ” status, press the “ Timer ” key to set the time when to automatically start or stop the
unit.
How to set timer for unit “ On ”: Under the “ Off ” state of the unit, press the “ Timer ” key with the symbol “
”in the timer zone flashing, and then press “▲” or “▼” to set when to start the unit, after that, press the “
Timer
”
key again to finish this setting. Before pressing “ Timer ” key to finish the setting for unit “ On ”, it is also available
to go to set when to stop the unit by pressing the “ Mode ” key with the symbol “ ” flashing, and then press “ ▲ ”
or “ ▼ ” to adjust the time, after that, press the “ Timer ” to finish this setting. Finally, the time displayed is for the
unit “ On ” while time for unit “ Off ” will not be displayed.
How to set timer for unit “ Off ”: When the unit is “ On ”, press the “ Timer ” key with the symbol
“ ” flashing, and then press “▲” or “▼” to set the time when to stop the unit, after that, press the “ Timer ” key
again to finish this setting. Before pressing the “ Timer ” key to finish the setting for unit “ Off ”, it is also available
to go to set when to start the unit by pressing the “ Mode ” key with the symbol “ ”flashing, and then press “▲”
or “▼” to adjust the timer, after that, press the “ Timer ” key again to finish the setting. Finally, the time displayed
is for the unit “ Off ” while time for unit “ On ” will not be displayed.
How to cancel the timer:When the timer is set, press “ Timer ” to cancel it and then no time will be displayed
on the LCD.