background image

 

To Users 

Thank you for selecting Gree  product. Please read this instruction manual 

carefully before installing and using the product, so as to master and correctly use 
the product. In order to guide you to correctly install and use our product and 
achieve expected operating effect, we hereby instruct as below: 

(1)  This appliance can be used by children aged from 8 years and above and 

persons with reduced physical, sensory or mental capabilities or lack of 
experience and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe way and understand 
the hazards involved. Children shall not play with the appliance. Cleaning 
and user maintenance shall not be made by children without supervision. 

(2)  In order to ensure reliability of product, the product may consume some 

power under stand-by status for maintaining normal communication of 
system and preheating refrigerant and lubricant. If the product is not to be 
used for long, cut off the power supply; please energize and preheat the 
unit in advance before reusing it. 

(3)  Please properly select the model according to actual using environment, 

otherwise it may impact the using convenience. 

(4)  This product can’t be installed at corrosive, inflammable or explosive 

environment or the place with special requirements, such as kitchen. 
Otherwise, it will affect the normal operation or shorten the service life of 
the unit, or even cause fire hazard or serious injury. As for above special 
places, please adopt special air conditioner with anti-corrosive or 
anti-explosion function. 

(5)  If the product needs to be installed, moved or maintained, please contact 

our designated dealer or local service center for professional support. 
Users should not disassemble or maintain the unit by themselves, 
otherwise it may cause relative damage, and our company will bear no 
responsibilities. 

(6)  All the illustrations and information in the instruction manual are only for 

reference. In order to make the product better, we will continuously 
conduct improvement and innovation. If there is adjustment in the product, 
please subject to actual product. 

Содержание FGR20Pd/DNa-X










































Отзывы: