Gree Cozy, Руководство пользователя

Страница: 23 / 32

Ф55
or
Ф70
Drill Piping Hole
1. Slant the piping hole ( 55 or Ф70) on the wall sligh t ly downward to the
outdoor side.
2.Insert the piping-hole sleeve into the hole to prevent
the connection piping
and wiring from being damaged when passing throug h the hole.
Indoor
Outdoor
Wall pipe
Seal pad
2 1
Installation of Indoor Unit
Installation of Mounting Plate
1.Mounting plate should be installed horizontal ly. As the water tray's outlet for the indoor unit is two-way
type, during installation, the indoor unit should slightly slant to water tray's outlet for smooth drainage of
condens ate.
2.Fix the mounting plate on the wall with screws.
3.Be sure that the mounting plate has been fixed firmly enough to withstand about 60 kg. Meanwhile
, the
weight should be evenly shared by e ach screw.
1.
2.
Installation of Drain Hose
Connect the drain hose to the outlet pipe of the indoor unit
.
Bind the joint with rubber belt.
Put the drain hose into insulating tube.
bulge
distortion
outlet pipe of
indoor unit
insulating tube
connected
insulating tube
drain hose
outlet pipe of
indoor unit
drain hose
outlet pipe of
indoor unit
outlet pipe of
indoor unit
rubber belt
rubber belt
rubber belt
Flooded
Ф
m m 0 5 1
Φ55mm or Φ70mm
m m 0 5 1
Fig.5
Wall Wall
Mark on the middle of it Gradienter
Left
Right
(Rear piping hole) (Rear piping hole)
Space
to the
wall
above
Space
to the
wall
above
Φ55mm or Φ70mm
3. Wrap the insulating tube with wide rubber b e lt to prevent
the shift of insulating tube. Slant the drain hose downward
slightly for smooth drainage of condensate.
Note: The insulating tube should be connected reliably
with the sleeve outside the outlet pipe. The drain hose
should be slanted downward slightly, without
distortion, bulge or fluctuation. Do not put the
outlet in the water.