background image

1

1

 

 

Emergency Operation

Emergency Operation

When the wireless remote control is lost or damaged, please use the manual switch, at this
time, it is running in Auto Run mode that will not change the temperature setting value and
fan speed.

The manual switch can be operated as follow:

At operation: When the unit stopped running, 
press ON/OFF button, unit will enter into AUTO 
RUN mode. The microcomputer will accord to 
the room temperature to select the (COOL, 
HEAT, FAN) mode automatically, to obtain the 
comfortable effect.

At stopping: When the unit is running, press the
ON/OFF button of the manual switch, the unit
will stop work.

The code switch can be operated as follow:

At operation: When the unit is stopped running,
adjust the code switch to AUTO, the unit will 
enter into AUTO RUN mode. The microcomputer
will accord to the room temperature to select the
(COOL, HEAT, FAN) mode automatically, to 
obtain the comfortable effect.

At stopping: When the unit is running, adjusts
the code switch to STOP position, the unit will
stop work. 

Code Switch

Manual Switch

AUTO/STOP

only for some models

Содержание Cozy

































Отзывы: