CASSET TE B SERIES
OWNERS MANUAL - INDOOR UNIT
|
13
3.12 Energy Saving Function Setting
Turn on energy saving function:
1. Energy Saving Setting for Cooling
• When the unit runs under the COOL or DRY mode,
press FUNCTION button to select “SAVE” function
option,“SAVE” will be flashing on the display. Press
or to adjust the lower limit, then press the SWING/
ENTER button to activate.
2. Energy Saving Setting for Heating
• When the unit runs under the HEAT mode, press
FUNCTION button to select “SAVE” function option,
“SAVE” will be flashing on the display. Press
or
to adjust the upper limit, then press SWING/ENTER
button to activate.
NOTE:
• Under energy saving setting mode, press “MODE”
button to switch the energy saving setting for COOL
or HEAT mode.
Turn off energy saving function:
• If energy saving function has been set, press
FUNCTION button on the panel to select “SAVE”
function option. When
SAVE
icon flashes, if you
press SWING/ENTER button without pressing or
button, energy saving function will be canceled; if
you press SWING/ENTER button after pressing
or
button, energy saving function will be activated.
3.13 X-fan Setting
• X-fan function: After the unit is turned off, the water
in evaporator of indoor unit will be automatically
evaporated to avoid mildew.
• In the Cooling or Dry mode, press FUNCTION till the
unit enters the X-fan setting interface and then press
SWING/ENTER to activate.
• When the X-fan function is activated, press and hold
FUNCTION until”X-FAN” appears then press SWING/
ENTER to cancel.
• X-fan function setting is as shown in Fig.15
NOTE:
1. When the X-fan function is activated, turning off
the unit by pressing ON/OFF or by the remote
controller, the indoor fan will run at the low fan
speed for 2 min, with “X-FAN” displayed on the
LCD. If the X-fan function is deactivated, the
indoor fan will be turned off directly.
2. X-fan function is unavailable in the Fan or Heating mode.
3.14 Quiet Function Setting
Turn on quiet function:
• Under unit on status, press FUNCTION button on the
panel to select “Quiet” function option. When“Quiet”
or “Auto quiet” flashes, it enters quiet function setting
mode. Press or button to switch between “Quiet”
and “Auto quiet” function. Then press SWING/ENTER
button to activate this function.
Cancel quiet function:
• If quiet function has been set, press FUNCTION button
on the panel to select “Quiet” function option.
• When “Quiet” or “Auto quiet” flashes, if you press
SWING/ENTER button without pressing or button,
quiet function will be canceled; if you press SWING/
ENTER button after pressing or
button, quiet
function will be activated.
WIRED CONTROLLER (Continued)
