6
42000 Rev C 8-26-13
Method 2: Permanent Install
(1) Put 2 wood strips in existing
fireplace cut to fit the height of the
opening, and spaced 26.5” apart
(2) Fix the wood strips with
masonry
screws
or
other
appropriate screws for the material
you’re attaching to.
(3) set insert surround into place.
Run cord through passthrough
hole if necessary .
(4) Put the fireplace insert into
place and using wood screws (not
included) attach the insert to the
surround and wood strips at
shown locations.
(5)Attach front face trim by hanging tabs on top, then pressing lower pins into spring
clips at bottom
GROUNDING
Plug the power supply cord into a wall outlet (120Vac, 60Hz).The cord has a plug as shown at A.
You should follow as shown at the below:
Grounding methods
(6) Completed Assembly
