GREAT PLANES TWINSTAR EP, Инструкция по эксплуатации

Страница: 9 / 24

9
❏
10. Locate the plywood nacelle frames. Coat the wing
pockets and aft ends with epoxy and fi t the frames into the
cutouts in the wings. Wipe away any excess epoxy with a
paper towel wetted with denatured alcohol. Use tape to hold
them in place. With epoxy still wet, put a thin coating on the
inside wall in the location shown on each frame. This will
provide a smooth surface to mount the ESC.
❏
11. Install the aluminum X-mount onto the motors using
the screws included with the motors and thread locking
compound. Install the prop adapters using the screws
included with the motors and thread locking compound.
❏
12. Mount the motors to the nacelle fi rewalls using 3 x12 mm
machine screws, 3mm fl at washers, and thread locking
compound. Be sure that the motor leads are towards the
top of the wing.