background image

BUILDING NOTES

The stabilizer and wing incidences and motor thrust angles 
have been factory-built into this model. However, some 
technically-minded modelers may wish to check these 
measurements anyway. To view this information visit the web 
site at www.greatplanes.com and click on “Technical Data.” 
Due to manufacturing tolerances which will have little or no 
effect on the way your model will fl y, please expect slight 
deviations between your model and the published values.

ORDERING REPLACEMENT PARTS

Replacement parts for the Seawind are available using the 
order numbers in the Replacement Parts List that follows. 
The fastest, most economical service can be provided by your 
hobby dealer or mail-order company. 

To locate a hobby dealer, visit the Hobbico

®

 web site at 

www.hobbico.com. Choose “Where to Buy” at the 
bottom of the menu on the left side of the page. Follow the 
instructions provided on the page to locate a U.S., Canadian 
or International dealer.

Parts may also be ordered directly from Hobby Services by 
calling (217) 398-0007, or via facsimile at (217) 398-7721, 
but full retail prices and shipping and handling charges will 
apply. Illinois and Nevada residents will also be charged 
sales tax. If ordering via fax, include a Visa

®

 or MasterCard

®

 

number and expiration date for payment.

Mail parts orders and payments by personal check to:

Hobby Services

3002 N. Apollo Drive, Suite 1

Champaign, IL 61822

Be certain to specify the order number exactly as listed in 
the  Replacement Parts List. Payment is by credit card or 
personal check only; no C.O.D. 

If additional assistance is required for any reason contact Product 
Support by e-mail at [email protected]
or by telephone at (217) 398-8970.

Replacement Parts List 

GPMA2730 *Wing
GPMA2731 *Fuselage
GPMA2732 

Tail Surface Set

GPMA2733 Wing 

Tips

GPMA2734 Canopy/Hatch
GPMA2735 

Spinner Set (2)

GPMA2736 Cowl
GPMA2737 Decal 

Set

GPMG4560 

RimFire 28-30-950 Brushless Out-runner Motor

GPMM1210 

ES50 Nano Servo

GPMM1820 

SS-25 Brushless ESC

*  When ordering replacement parts the part does not include the 

motor, ESC or servos.

4

To convert  inches to millimeters, multiply inches by 25.4 (25.4mm = 1")

Содержание SEAWIND RP RX-R

















Отзывы: