•
Whenever just
epoxy is specified you may use either
30-minute (or 45-minute) epoxy or 6-minute epoxy. When
30-minute epoxy is specified it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
•
Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
Fuse = Fuselage
Stab = Horizontal Stabilizer
Fin = Vertical Fin
LE = Leading Edge
TE = Trailing Edge
LG = Landing Gear
" = Inches
mm = millimeters
COMMON ABBREVIATIONS
4
To order replacement parts for the Great Planes Micro Whizz ARF, use the order numbers in the Replacement Parts List
that follows. Replacement parts are available only as listed. Not all parts are available separately (an aileron cannot be
purchased separately, but is only available with the wing kit). Replacement parts are not available from Product Support,
but can be purchased from hobby shops or mail order/Internet order firms. Hardware items (screws, nuts, bolts) are also
available from these outlets. If you need assistance locating a dealer to purchase parts, visit www.greatplanes.com and
click on “Where to Buy.” If this kit is missing parts, contact Great Planes Product Support.
Replacement Parts List
Order Number
Description
How to Purchase
Missing pieces.....................Contact Product Support
Instruction manual ...............Contact Product Support
Full-size plans .....................Not available
GPMA2600
Wing Kit
GPMA2601
Fuse (Nose Section)
GPMA2602
Tail Rod
GPMA2603
Tail Set
GPMA2604
Landing Gear Set
GPMA2605
Hardware Set
ORDERING REPLACEMENT PARTS
................ Contact Your Hobby
Supplier to Purchase
These Items
0"
1"
2"
3"
4"
5"
6"
7"
0
10
20
30
40
50
60
70
80
90
100 110 120 130 140 150 160 170 180
Inch Scale
Metric Scale
To convert inches to millimeters, multiply inches by 25.4
