19
❏
13. Switch on the transmitter and temporarily plug in the
receiver battery. Connect the motor batteries to the ESC and
check the rotation direction of the motor.
WARNING!
Make
sure the propeller is
NOT
installed.
❏
14. Disconnect the motor batteries, receiver battery and
switch off the transmitter.
Proceed to Install the Cowl (page 25).
Gas Engine Installation
❏
1. Using a 13/64" bit, drill the fi rewall for your engine. The
DLE30 and O.S. GT33 are rotated 17 degrees so that the
muffl er remains inside the cowl.
❏
2. Install the pivot ball on the throttle and choke arm.
❏
3. Temporarily mount the engine.
❏
4. Mark the fuel line, throttle and optional choke pushrod
locations on the fi rewall. The choke can also be operated
manually through the front of the cowl.
❏
5. Drill the fi rewall for the throttle, optional choke and
fuel line.
❏
6. Reinstall the engine. Use threadlocker on all the bolts.
Assemble the Fuel Tank
❏
1. Roughen both ends of the brass tubes with sandpaper.
