GREAT PLAINS PL5500 PTO, Руководство по установке и обслуживанию

Страница: 20 / 28

Great Plains | 411-774M | 2019 - 09 - 12 Table of Contents 18
PL5500 PTO Pump Kit Table of Contents
Install Oil Reservoir
The Oil Reservoir is to be installed on the tongue at the
hitch.
1. Using a measuring tape and grease pencil, measure
23 in (59 cm) from the edge of the hitch plate as
shown. Mark the measurement.

It is important to accurately measure the distance on
the hitch, if the oil reservoir is mounted too close to the
end of the hitch, it may become damaged when
turning the PL5500 planter.
2. Secure the oil reservoir with two u-bolts (14), four
washers (13), and four nuts (12) to the oil reservoir
tank (11) to the tongue.
Install Oil Cooler
The PL5500 planter PTO pump assembly kit contains an
oil cooler assembly. It is to be installed on the tongue
near the hitch; about 5 inches (13 cm) behind the oil
reservoir.
1. Secure the pressure flow control valve (30) to the fan
mount (27) using three bolts (22), three locking
washers (24), six washers (25), and three nuts (23).
TP-71553
23 in
(59 cm)
TP-71554
TP-71555
TP-71556