GREAT PLAINS PL5500 PTO, Руководство по установке и обслуживанию

Страница: 18 / 28

Great Plains | 411-774M | 2019 - 09 - 12 Table of Contents 16
PL5500 PTO Pump Kit Table of Contents
Pre - Delivery Setup
If you are installing the PTO pump assembly kit on a newly - shipped PL5500 planter, it may be more convenient to
install the PTO pump assembly kit during the pre - delivery setup:
•
Install the PTO pump system
after
installing the tongue (pull - type only). The tongue must be in place for hose
re - routing.
•
Install the PTO pump system
after
mounting a fertilizer sub - frame (option, pull - type only). This sub - frame must be
in place for flow control valve mounting, and in some cases, reservoir mounting.
•
Install the PTO pump system
before
installing frame - mounted row options. This improves foot room and reduces
sharp object hazards while working near tool bars.
•
Install the PTO pump system
before
installing row - mounted coulters or row cleaners. This improves foot room and
reduces sharp object hazards while working near tool bars.
•
Install the PTO pump system
before
installing markers. This eliminates an overhead sharp object hazard, and
improves working space at the mainframe.
Prepare Planter
•
Read and understand “ Important Safety Information ” starting on page 1.
•
Position the PL5500 planter on a level surface, in a well lighted location, suitable for the installation. A clear
surface beneath makes it easier to recover any dropped parts. If markers are already installed, choose an area
with enough room to unfold them.
•
Configure the PL5500 planter for Parking, as instructed in the PL5500 planter Operator Manual.
•
If markers are already installed, unfold them.
•
Unhitch the PL5500 planter.
•
Shut off tractor and remove the key.
Mount PTO Pump
1. Turn the tractor off and remove the key.
2. Make any necessary adjustment to the tractor
drawbar (1). This might include:
inverting an offset drawbar, and/or
relocating a clevis assembly (not shown).
3. Clear the PTO shaft (2) of any pins or wires that
might prevent the PTO pump from fully seating on
the shaft.
4. With hydraulics hoses to rear, and torque arm to right of drawbar, slide the pump assembly fully onto the PTO
shaft (2).
34620
3
2
1