GREAT PLAINS NTS2507 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 76

background image

Section 8: Maintenance & Lubrication

NTS2507, NTS2509, & NTS2511 s/n+ 2019+ NTS Seeder 313-900M

7/1/19

55

Table of Contents

Maintenance

Proper servicing and adjustments are key to the long life
of any implement. Check all bolts for tightness after
several hours of operation. Replace worn, damaged, or
illegible safety labels by obtaining new labels from your
Great Plains dealer. With careful inspection and routine
maintenance, you can avoid costly downtime and repair.

DANGER

!

To avoid serious injury or death:

•

Always secure equipment with solid, non-concrete supports

before working under it. Never go under equipment
supported by concrete blocks or hydraulics. Concrete can
break, hydraulic lines can burst, and/or hydraulic controls
can be actuated even when power to hydraulics is off.

WARNING

!

To avoid serious injury or death:

•

Always shut tractor down using “Tractor Shutdown

Procedure” provided in this manual before servicing,
adjusting, cleaning, or maintaining this implement.

•

Allow only persons to perform maintenance on this

implement who have been properly trained in its safe
operation.

•

Perform scheduled maintenance. Check for loose

hardware, missing parts, broken parts, structural cracks,
and excessive wear. Make repairs before putting implement
back into service.

•

Do not alter implement or replace parts on the implement

with other brands. Other brands may not fit properly or
meet OEM (Original Equipment Manufacturer)
specifications. They can weaken the integrity and impair the
safety, function, performance, and life of the implement.
Replace parts only with genuine OEM parts.

Roller Chains & Sprockets

Refer to Figure 8-1 & Figure 8-2 on page 56:

Your drive system uses standard #40 roller chain and is
designed for low maintenance.

General Chain & Sprocket Maintenance

1.

Inspect all chains and sprockets for wear and replace
as needed.

2.

Clean and lubricate all roller chains with chain
lubricant as needed.

All Seeds Drive Chains #3, #6, & #9

Refer to Figure 8-1:

1.

Check tension of chain (#3). If needed loosen 3/8"-16
locknut (#1) and adjust idler sprocket (#2) to tighten/
loosen chain (#3).

2.

Tighten locknut (#1) to the correct torque.

3.

Check chain (#3) to ensure it is not over-tightened.

4.

Check tension of chain (#6). If needed loosen 3/8"-16
locknut (#4) and adjust sprocket (#5) to tighten/
loosen chain (#6).

Grass & Small Seed Standard Sprockets & Chains

Figure 8-1

5.

Tighten locknut (#3) to the correct torque.

6.

Check chain (#6) to ensure it is not over-tightened.

7.

Check tension of chain (#9). If needed loosen 3/8"-16
locknut (#7) and adjust sprocket (#8) to tighten/
loosen chain (#9).

8.

Tighten locknut (#4) to the correct torque.

9.

Check chain (#9) to ensure it is not over-tightened.

Grass Seeds Standard Chains #12

Refer to Figure 8-1:

1.

Check tension of chain (#12). If needed loosen
3/8"-16 GR5 bolt (#10) and adjust sprocket (#11) to
tighten/loosen chain (#12).

2.

Tighten bolt (#10) to the correct torque.

3.

Check chain (#12) to ensure it is not over-tightened.

Small Seeds Drive Chain #15

Refer to Figure 8-1:

1.

Check tension of chain (#15). If needed, loosen
3/8"-16 locknut (#13) and adjust sprocket (#14) to
tighten/loosen chain (#15).

2.

Tighten locknut (#13) to the correct torque.

3.

Check chain (#15) to ensure it is not over-tightened.

39051

Section 8: Maintenance & Lubrication

«
...
57
58
59
60
61
...
»

Содержание NTS2507













































































Отзывы:

Нет отзывов

Похожие инструкции для NTS2507

Бренд: EarthWay Страницы: 5

Бренд: GYS Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды