GREAT PLAINS d LS12 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 32

GREAT PLAINS d LS12 Скачать руководство пользователя страница 3

LS10 and LS12

Table of Contents

Great Plains

| 117-055M | 5/6/19

i

©

Copyright 1999, 2019 All rights Reserved

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,

Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.

Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,

Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.

Brand and Product Names that appear and are owned by others are trademarks of their respective owners.

Printed in the United States of America

Table of Contents

Safety Information ..................................................................1

Safety Decals ....................................................................4

Introduction.............................................................................7

Intended Usage .................................................................7
Using This Manual.............................................................7
Owner Assistance..............................................................7

Preparation and Setup ...........................................................8

Prestart Checklist ..............................................................8

Tools Required ...........................................................8

Mount Seeder on Plow ......................................................8
Hydraulic Hose Connections .............................................9

Operating Instructions .........................................................10

Prestart Checklist ............................................................10
Field Operation ................................................................11
Transporting ....................................................................11
Parking ............................................................................12

Adjustments ..........................................................................13

Seeding Rate Adjustment................................................13
Seed Cup Doors ..............................................................13
Seeding Rate Chart .........................................................14
Distribution Panels...........................................................14

Troubleshooting ...................................................................15
Maintenance and Lubrication ..............................................16

Maintenance ....................................................................16
Lubrication .......................................................................16
Storage ............................................................................17

Removing Seeder from Plow....................................17

Specifications and Capacities .............................................18
Pre-Delivery Instructions .....................................................19

Install Lights.....................................................................19

Amber Lights Installation ..........................................19
Red Lights Installation ..............................................19

Harness Installation .........................................................20

Appendix ...............................................................................21

Torque Value Chart .........................................................21
Hydraulic Schematics ......................................................22

«
1
2
3
4
5
...
»

Содержание d LS12

































Отзывы:

Нет отзывов