GREAT PLAINS d LS12, Руководство оператора, Страница: 21 / 32

LS10 and LS12 Table of Contents Index Maintenance and Lubrication
Great Plains | 117-055M | 5/6/19 Table of Contents Index 17
Storage
Always park implement with plow wings swept back and rear
parking stand in the parking position for maximum stability.
Do not use ladder or walkboard when unit is not hitched to
tractor.
Store seeder where children do not play. If possible, store
implement inside for longer life.
1. Clean seeder as necessary. Be sure the seed box is
cleaned completely before storing.
2. Lubricate as indicated under “ Lubrication ” on
page 16.
Removing Seeder from Plow
Crushing hazard:
You will be severely injured or killed if the seeder falls on you.
Secure seeder to lifting equipment so seeder cannot fall. Do
not walk or place any part of your body under the seeder as
the seeder is being lifted.
Obey all safety instructions from lifting equipment
manufacturer. Be sure lifting equipment has enough capacity
to lift seeder.
1. Reposition the ladders for use as stands. Remove
the ladders from the side of the seeder. Install the
ladders to the seeder through the lower set of holes
in the ladder.
2. Secure the seeder to the forklift or hoist.
3. Disassemble the flat bars (A) that secure the seeder
to the plow frame.
4. Lift the seeder off the plow.
17994
Figure 12
Reposition Ladder
Figure 13
Disassemble Flat Bars
17993