GREAT PLAINS d LS12, Руководство оператора, Страница: 7 / 32

LS10 and LS12 Table of Contents Index Safety Information
Great Plains | 117-055M | 5/6/19 Table of Contents Index 3
High Pressure Fluids
1. Escaping fluid from holes in hydraulic lines is difficult
to spot. Do not use your hands or bare skin to search
for suspected leaks; instead, use a piece of
cardboard or wood. If injured by escaping hydraulic
fluid, see a medical professional immediately.
Exposure can result in gangrene or severe allergic
reaction.
2. Check that hydraulic fittings are tight and all hydraulic
hoses and lines are in good condition before
applying pressure to the system.
3. Wear protective gloves and safety glasses or
goggles when working with hydraulic systems.
Transporting
1. As with transporting any piece of heavy machinery,
comply with all local laws and regulations before and
during transport process.
2. Transport only at recommended transport speed for
implement. Some rough terrains require a slower
speed. Sudden braking can cause a towed load to
swerve and upset.
3. Before towing implement on roads, make sure to
empty out all material from the hoppers or boxes.
4. Know transport height and width of implement.
5. Do not tow an implement that, when fully loaded,
weighs more than 1.5 times the weight of towing
vehicle.
6. Keep clear of overhead power lines and other
obstructions when transporting.
7. Reduce speed when turning, and make as wide a
turn as possible. Turning tractor too tight can cause
implement to tip over.
8. When towing on a trailer, secure implement with tie
downs and chains.
9. When towing on a trailer, sudden braking can cause
a trailer to swerve and upset. Reduce speed if trailer
is not equipped with brakes.
Safety Chain
1. Use a chain with a strength rating equal to or greater
than the gross weight of towed machinery.
2. Replace chain if any links or end fittings are broken,
stretched or damaged.
3. Do not use safety chain for towing.
Safety Lights and Devices
1. Always use safety lighting. Slow-moving tractors and
towed machinery can create a hazard when driven
on public roads. They are difficult to see, especially
at night.
2. If equipped, use flashing warning lights and turn
signals whenever driving on public roads.
3. Use safety devices provided with implement.
4. Keep safety lights and signs clean and visible from
front and rear of machine.
5. Keep lights in operating condition.
Shutdown and Storage
1. Park the tractor and implement on a solid, level
surface where children normally do not play.
2. Put tractor in park or set the parking brake. Turn off
engine and remove switch key to prevent
unauthorized starting.
3. Wait for all components to come to a complete stop
before leaving the operator’s seat.
4. Detach the tractor. Secure the implement using
blocks.
Proper Waste Disposal
1. Dispose of waste properly to avoid threatening the
environment and ecology. Potential harmful waste
includes oil, fuel, filters, and batteries.
2. Use a leak-proof container for draining fluids. Do not
use a food or beverage container that may be
mistaken for a consumable product.
3. Do not drain or pour waste onto the ground, down a
drain, or into any water source.
4. Contact your local environmental or recycling center
for the proper way to recycle or dispose of waste.