GREAT PLAINS d LS12 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 32

GREAT PLAINS d LS12 Скачать руководство пользователя страница 20

Great Plains

| 117-055M | 5/6/19

Table of Contents

16

LS10 and LS12

Table of Contents

Maintenance and Lubrication

Maintenance and Lubrication

Maintenance

Proper servicing and maintenance is the key to long
implement life. With careful and systematic inspection,
you can avoid costly maintenance, downtime and repair.

Always turn off and remove tractor key before making any
adjustments or performing any maintenance.

Crushing Hazard:

You may be severely injured or killed by being crushed under
the falling implement. Always lower plow to the ground before
servicing the implement.

High Pressure Fluid Hazard:

Escaping fluid under pressure can have sufficient pressure to
penetrate the skin. Check all hydraulic lines and fittings before
applying pressure. Fluid escaping from a very small hole can
be almost invisible. Use paper or cardboard, not body parts,
and wear heavy gloves to check for suspected leaks. If injured,
seek immediate medical assistance from a doctor that is
familiar with this type of injury.

1.

After using the seeder for several hours, check all
bolts to be sure they are tight.

2.

Adjust the idlers to remove excess slack from the
drive chain.

3.

Lubricate areas listed under “

Lubrication

4.

Clean the seeder on a regular basis. Regular and
thorough cleaning lengthen equipment life and
reduce maintenance and repair.

5.

Inspect hydraulic hoses for cuts, cracks, and aging.
Check fittings for evidence of leaks.

6.

Replace any worn, damaged, or illegible safety
decals. Order new decals from your Great Plains
dealer. Refer to “

Safety Decals

Lubrication

Drive Chain

Type of Lubrication: Chain Lube
Quantity: Coat thoroughly

As Required

17991

«
...
18
19
20
21
22
...
»

Содержание d LS12

































Отзывы:

Нет отзывов