GREAT PLAINS 3P1006NT, Руководство оператора

Страница: 31 / 102

3P1006NT Table of Contents Index Operating Instructions 27
2018-06-06 Table of Contents Index 151-144M
Typical
a
3P1006NT Weights by Configuration
Trailer Transport
Load Maneuvering Hazard - Use care and planning when
loading or unloading the drill in trailer transport. The rear
casters may turn and force the drill off the trailer.

Make sure the trailer is rated for the load.

Make the trailer is wide enough for the load.

Make sure the load is secured properly.
Loading Trailer
1. Hitch suitable 3-point tractor with available hydraulic
remote (page 15).
2. Raise drill (page 21).
Loading with Casters Locked
3. Carefully line-up the tractor, drill and trailer, so that:
a. no turns are needed for the final movement, and
b. the casters are fully reversed.
4. Install caster swivel lock pins (page 24).
5. Carefully back the drill onto the trailer bed.
6. Lower the drill (page 23).
7. Secure the load with cargo straps or chains.
Great Plains recommends locking casters prior to loading for
trailer transport, and leaving them locked for transport and
unloading. This reduces the risk of loading and transport
accidents which could result in significant implement damage.
Unloading Trailer
1. Check that casters are still locked.
2. Release cargo straps or chains.
3. Hitch suitable 3-point tractor with available hydraulic
remote (page 15).
4. On a narrow trailer, confirm that caster pivot swivel
locks are still in place (page 24).
5. Raise drill (page 21).
6. Carefully tow drill from trailer.
7. Remove caster pivot swivel locks (if engaged,
page 24).
8. Unless arriving at planting ground, install lift-assist
cylinder transport locks (page 21).
a. Weights are for serial number , are approximate, and can vary by hundreds of pounds based on material density, press wheel
options, accessories and user modifications. Weight kit figures presume 10 each 100 pound suitcase weights.
All Boxe s Empty 4 8 21 l bs 5145 l bs 510 8 l bs 4 88 0 l bs 5220 l bs 5410 l bs
21 8 7 kg 2 33 4 kg 2 3 17 kg 2214 kg 2 3 6 8 kg 2454 kg
Full Main Box and 6101 l bs 7115 l bs 6 388 l bs 6160 l bs 7190 l bs 6690 l bs
Full Fertilizer (if pre s ent) 2767 kg 3 227 kg 2 8 9 8 kg 2794 kg 3 261 kg 3 0 3 5 kg
All Boxe s Empty 59 8 9 l bs 6 3 1 3 l bs 6277 l bs 6049 l bs 6 388 l bs 6579 l bs
with Wei g ht s
2717 kg 2 8 6 3 kg 2 8 47 kg 2744 kg 2 8 9 8 kg 29 8 4 kg
Full Main Box, Wei g ht s , 7269 l bs 8 2 83 l bs 7557 l bs 7 3 29 l bs 83 5 8 l bs 7 8 59 l bs
Full Fertilizer (if pre s ent)
3 297 kg 3 757 kg 3 42 8 kg 33 24 kg 3 791 kg 3 565 kg
3 2 8 00A
S tandard Drill
Option (40)
Drill with
Fertilizer
Drill with NG
(Native Gra ss )
Drill with S G S
( S mall S eed s )
Drill with
Fert. and S G S
Drill with
NG and S G S
Unstable Load Hazard - Do not transport on a trailer of
insufficient width or length. Unless both caster tires are on the
bed, too few openers are supporting the entire drill. The load
may spill, with risk of serious injury or death to anyone
nearby, and certainty of major equipment damage.
Machine Damage Risks - The drill must be hitched to a
3-point tractor for any movement. Coulter or opener damage
is likely if unhitched movement is attempted. Observe all
hitching precautions.