795-93848
5 of 41
12/23/21
Do not operate below minimum liquid level marking. Low liquid level may result in motor failure,
creating a potential fire hazard. Fill tank to recommended operating capacity range before
plugging in power cord Do not operate with tank empty.
Operator shall wear appropriate PPE (personal protective equipment). Refer to cleaning fluid
SDS (safety data sheet) for details. If any cleaning solutions are splashed on clothing, remove
wet clothing promptly and thoroughly wash body areas that have been in contact with the
solution. Do NOT permit saturated clothing to remain in contact with skin. Cleaning solutions may
irritate skin and eyes. If splashed in eyes, flush thoroughly with water. Consult Safety Data Sheet
(SDS) and a physician. Always wear appropriate safety items such as gloves, apron, safety
glasses or goggles.
Floor may be slippery when wet, do not splash fluids out of tank.
Use with solvent cleaning fluids only. The use of aqueous based (water) cleaning fluids will
damage the finish and cause rusting.
Install unit on level surface. Do not overload tank floor, shelf, or trays. Load items evenly, do not
allow items to overhang outside tank.
Never work with equipment you feel may be unsafe. Contact your supervisor immediately if you
feel a piece of equipment is in an unsafe condition.
