Professional 14 Inch Rotary Surface Cleaner
AW-7020-8009
HAZARD
POTENTIAL CONSEQUENCE
PREVENTION
RISK OF
BODILY INJURY
Serious injury or death could
occur.
ALWAYS read, understand, and follow operation
instructions.
ALWAYS wear protective eye wear.
ALWAYS keep clear of rotating nozzles.
NEVER lock trigger gun open with any device.
RISK OF EQUIPMENT
DAMAGE
Risk of major repair.
Drain water in cold weather to avoid freezing.
Use only genuine Mi-T-M replacement parts for
necessary repairs.
Tampering with any part of this machine will void all
warranties.
!SAVE THESE INSTRUCTIONS!
Form #37-1357-122115
OPERATION:
Read, understand, and follow ALL safety guidelines and operation instructions prior to use.
1. Connect the lance from your pressure washer to the surface cleaner.
2. Turn water on. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove
tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use Teflon tape when
installing nozzles.
3. Start pressure washer. The Rotary Surface Cleaner is ready for operation.
4. Walk slowly behind the Rotary Surface Cleaner cleaning as you go. If striping occurs, slow down your pace.
5. Check “weep holes” on bottom of swivel periodically. Water will seep slowly; if water shoots out, stop and replace
seals. Swivel assembly can be rebuilt.
6. For maximum effectiveness keep spray tips clean. If the machine vibrates, stop and clean spray tips.
DO NOT ALLOW MACHINE TO REMAIN STATIONARY ON SOFT SURFACES, SUCH AS WOOD.
CAUTION: Striking any raised obstacle during operation will damage machine. If contact does occur and results in
vibration when operating machine, STOP and replace spray bar. Continued operation could result in serious
injury or damage to machine.
Warning: This product contains lead, a
chemical known to the State of California
to cause birth defects or other reproductive
harm.
Wash your hands after handling this product.
SPECIFICATIONS
Model
AW-7020-8009
Operating Pressure
4,200 PSI
Maximum Flow
8.0 GPM
Maximum Temp.
180°F
Nozzles (2 per unit)
25020
Weight
4.4 lbs
Dimensions
16” x 16” x 7.25”
Mi-T-M Corporation
50 MI-T-M Drive Peosta, IA 52068
Ph: 800-553-9053 - Fax: 563-556-1235
