9
INSTALLING BAGGER BOOT
(815040 ONLY)
NOTE:
Discharge chute can remain attached to deck.
1. Slide boot bracket under discharge chute bracket.
See Figure 7.
2. Using front and rear boot straps, secure the boot by
attaching boot straps to deck posts. See Figure 7.
INSTALL BAGGER BOOT
(815041 ONLY)
1. Lift discharge chute and insert discharge bagger
boot into deck discharge opening. See Figure 8.
NOTE:
Discharge chute can remain attached to deck.
2. Insert bagger boot fully into opening making sure
that the front of the boot is positioned inside of the
deck shell and the top edge of the boot is
positioned on top of the deck shell and below the
discharge chute. See Figure 8.
3. Push the bagger boot fully into the discharge
opening and attach the rear boot strap to the rear
attaching post. See Figure 8.
4. Attach the boot front strap to the front attaching
post. See Figure 8.
WARNING:
On multi-blade mowers, rotation of
one mower blade will cause all blades to rotate.
WARNING:
Mower blades are sharp and can
cut you. Wrap the blades or wear gloves, and
use extra caution when servicing them.
Figure 7
Front
Deck
Post
Front Boot Strap
Boot Bracket
Slide boot
bracket under
discharge
chute.
Secure boot by
hooking boot
straps to front and
rear deck posts.
Boot
Figure 8
Bagger Boot
Connect rear
boot strap to
deck post.
Connect front
boot strap to
deck post.
